★ Before starting the machine, be sure to check each machine components is complete, the circuit is safe and reliable, you may not start the machine. ★ job site should be spacious to ensure ventilation and fire safety, the operator must wear neatly tie up long hair fixed, the power switch should be close to the operator, in order to cut off the power supply as soon as possible when a failure occurs. Do hard debris into the machine, so as to avoid damage to the machine man. ★ When checking the machine, you must cut off the power. ★ work process, the feed material to be continuous, uniform, moderate feed rate, otherwise it will affect the quality and efficiency of operations. At the end of the job can not be shut down immediately, should continue to run 3-5 minutes, so that all the material before the machine drained after shutdown, otherwise easily lead to blockage in the machine. ★ When blocked, should be immediately shut down, only to be cleaned after the machine is completely stopped. ★ machine in operation, children and the elderly with limited mobility or other seriously ill people, shall not operate as well as close to the machine, Lysimachia mouth not stop people when the machine is working, in order to avoid injury. The overall structure of straw rubbing silk straw machine scrubbing machine generally more complex, at least two working shaft, such as the need for transmission gear or sprocket; high cutter component production process requirements, and therefore production costs are relatively high. Use: "Wan Teng" brand feed scrubbing machine for silage and some hard straw processing. Including corn stalks, soybean, peanut straw and other crop residues its performance characteristics: 1, feed processing, can be turned into soft silk grass, improve feed utilization and palatability. 2, processed feed and other feed processing mill compared to feed its biggest advantage is fibrous tissue from destruction, not the loss of nutrients. 3, compact machine is easy to operate, safe and reliable. Straw rub rub machine way: many models in use rub rub machine structure. Because there is the rub straw silk strip form the basis of, after the high-speed hammer pounding, rubbing effect after its better than straw kneading machine. Another is the fence rub. Fence is open at one end with a slit-type screen, the distribution arrangement similar handheld manpower five fingers. Each part of the high-speed rotation of the tool edge, running in the corresponding caught in the fence, driving on a strand of straw has been formed in the cracks of the walking path, part of the filamentous straw failed to exclude the fence is mounted on each strip, Each channel of the fence cracks resulting gap is reduced when the material in the rotary cutter driven by force, and caught in the straw material attached evolving impact, compression, intense friction and dynamic tearing frustration, and ultimately the formation of soft and delicate, uniform The filaments were active filter removed, making it a genuine soft, high-quality feed like grass. By rubbing the straw feed fence is suitable for cattle, sheep and other livestock, especially for sheep, deer, horses. Straw utilization of nearly one hundred percent.