Safe use and precautions: 1. Before using the machine, please read the product manual, in the understanding of this machine is used and precautions, before using the machine. 2. The operator must have a warning label on the product, fuel, and other considerations such as the symbol of the nameplate after a clear understanding, as required to operate the machine. 3. Boot preceded check all parts are secure, add a little oil before opening the machine (Note: When non-empty running, frequently pulled the clutch pedal) 4. Power should be preceded by a manual disk drive for 2-3 weeks confirmed no abnormal can only start to boot. 5. Start preceded by checking the direction of rotation meets the requirements, non-inverted boot. 6. tied 3-5 after the load test machine, you should stop to check whether all rotating parts and fixed parts of other abnormal, if no abnormal can be put into production use. 7. When the non-boot add oil. 8. Do not drink and operate the machine. 9. machine maintenance should be carried out after 300 hours of normal use. 2,3,4,5,6 based upon the use of the boot provides operational use again. 10. Maintenance, inspection as follows: (1) Check the chain sprocket, the more severe wear to be replaced. (2) Check the shaft axial and radial clearance, adjust or replace it. (3) whether each of the oil flow. (4) to clear the blockage. (5) The rotating parts filling oil, the remaining parts of oiled rust. Touching each non-rotating parts 11. boot. 12. Wheels and support should be fixed firmly fixed. Eight, the machine environment: (1) After rigorous training of qualified operatives before using the machine. (2) when the ambient temperature is less than 2 degrees Celsius above zero is not allowed to use this machine. (3) straw and forage moisture is greater than 65%, are not allowed to use this machine. (4) When using the motor as the driving force, you must install the ground wire. (5) timely clean silt material beneath the rotating frame bevel gear, rope, etc. Otherwise damaged machine parts, the company is not responsible. (6) forage moisture at 60% to 65%, to be coated bale weight does not allow more than 65 kg / bale, otherwise damage to the machine parts, the company is not responsible. (7) Operation of each envelope bundle allows only one operation. (8) anomalies arise during operation of the machine, the user should promptly contact your local dealer or manufacturer, never allow the user to disassemble the machine, but the machine does not allow unauthorized alteration, or peril. (9) the machine during use or storage, must be prepared to water, rain, rust treatment. The machine under normal conditions of use, production within five thousand packets, if there is damaged parts, factory replacement parts free of charge, free services; the Company other than five thousand packages of parts cost only charge fees, and lifetime service. Note: This machine structure, after type improvements without notice