This machine is suitable for dried, crushed corn, sorghum, soybean and other straw pressed into pellets with a certain density. Straw pellets in addition to a straw original nutrition, there are pressing process due to heat generated fragrant paste, known as hard tack feed cattle and sheep. The machines are mechanically driven plunger pressing machine, because there are three crank spindle, can drive three plunger movement, so called three-plunger-type straw pellets machine. The body of the machine consists of three major components: a power and transmission - it provides the machine to achieve the required power and deceleration. Powered by a three-phase AC motor, gear belt drive adoption. 2. compacting device - by a crank mechanism and a plunger mold materials and other component parts, by the spindle of the three plunger turns straw raw material pressed into the mold and molding. In the straw feed molding process, which requires electric lap straw materials properly heated to soften the straw lignin. Straw feedstock under enormous pressure plunger action, by softening the adhesive effect of lignin, they formed a pellet with a certain density, and continue to be squeezed. 3. The three groups linkage screw feeder - whose role is to continuously supply of raw materials to feed mold straw. After the motor through reducer via chain drive and gear while driving three spiral complete feed. Feed particle machine models offer yield (kg / H) Power (KW) process specifications (mm) Remarks price (yuan) 10 580 2.2 2-6 V-belt drive 980 120100-12032-6 belt drive 1260150150-200 2-6 Section 5.5 2580 200 propeller shaft universal joint drive shaft 200-300112-8 2980 260300-500152 -8 drive shafts 5600 330 700-900222-20 joint drive shafts 8,980,400 1000-1500 372-20 propeller shaft 12860